CWF Custom Flashlights carries a variety of twist style lights. Design by Charles Wiggins, you’ll enjoy showing off and using this beautifully machined flashlight. Each is hand machined and assembled in the USA. For more of a variety, check out our full category of flashlights.
-
Out of StockBulb Type: Nichia 219C High CRI Max Output: 650 lumens Body Material: Titanium OAL: 3.65"" Bezel Diameter: 15.6 mm Body Diameter: 13.0 mm Weight: 1.35 oz. Made in America
-
Out of StockBulb Type: Nichia 219C High CRI Max Output: 650 lumens Body Material: Aluminum OAL: 3.65"" Bezel Diameter: 15.6 mm Body Diameter: 13.0 mm Weight: 1.35 oz. Made in America
-
Out of StockBulb Type: Nichia 219C High CRI Max Output: 650 lumens Body Material: Titanium OAL: 3.65"" Bezel Diameter: 15.6 mm Body Diameter: 13.0 mm Weight: 1.35 oz. Made in America
-
Out of Stock
- Solid Machined Lightweight Titanium Body And Clip
- Nichia 219c 5000K High CRI LED
- Triple Emitters
- RGB Secondary LEDs
- Quantum Dragon Driver with Instruction Card
-
Out of StockBulb Type: Nichia 219C High CRI Max Output: 650 lumens Body Material: Titanium OAL: 3.65"" Bezel Diameter: 15.6 mm Body Diameter: 13.0 mm Weight: 1.35 oz. Made in America
-
Out of Stock
- Solid Machined Lightweight Titanium Body And Clip
- Nichia 219c 5000K High CRI LED
- Triple Emitters
- RGB Secondary LEDs
- Quantum Dragon Driver with Instruction Card
-
Out of StockMode Groups: 1- Moonlight, 5%, 15%, 35%, 50%, 100% 2- Moonlight, 5%, 15%, 35%, 100% 3- Moonlight, 15%, 35%, 100% 4- 5%, 15%, 35%, 50%, 100% 5- 5%, 15%, 35%, 100% 6- 5%, 35%, 100% 7- 15%, 35%, 50%, 100% 8- 15%, 50%, 100% 9- 15%, 100% 10- 50% Configuration Options: To enter configuration mode, quickly cycle the switch 10+ times until it starts to flash. Once it starts to flash, you are in configuration mode. Once in configuration mode, the light will give a solid light and ramp down, if you want to modify options 2-3 cycle switch during ramp to move to next option. Option 1 Mode group: when light ramps down it will step down and then the group number will blink followed by another step down. To select the group blinked cycle the switch in the step down cycle after the group you want to use. Option 2 Memory on/off: when light ramps down it will flash low power and then high power. Cycle switch while flashing low if you want memory off and high if you want memory on. Option 3 Strobe: when light ramps down it will flash 3 different power levels, cycle switch while flashing low if you want strobe off, medium for bicycle mode and high for strobe mode. To access these in normal use cycle switch three times rapidly and it will access either strobe programmed when turned on.
-
Out of StockMode Groups: 1- Moonlight, 5%, 15%, 35%, 50%, 100% 2- Moonlight, 5%, 15%, 35%, 100% 3- Moonlight, 15%, 35%, 100% 4- 5%, 15%, 35%, 50%, 100% 5- 5%, 15%, 35%, 100% 6- 5%, 35%, 100% 7- 15%, 35%, 50%, 100% 8- 15%, 50%, 100% 9- 15%, 100% 10- 50% Configuration Options: To enter configuration mode, quickly cycle the switch 10+ times until it starts to flash. Once it starts to flash, you are in configuration mode. Once in configuration mode, the light will give a solid light and ramp down, if you want to modify options 2-3 cycle switch during ramp to move to next option. Option 1 Mode group: when light ramps down it will step down and then the group number will blink followed by another step down. To select the group blinked cycle the switch in the step down cycle after the group you want to use. Option 2 Memory on/off: when light ramps down it will flash low power and then high power. Cycle switch while flashing low if you want memory off and high if you want memory on. Option 3 Strobe: when light ramps down it will flash 3 different power levels, cycle switch while flashing low if you want strobe off, medium for bicycle mode and high for strobe mode. To access these in normal use cycle switch three times rapidly and it will access either strobe programmed when turned on.
-
Out of Stock
- Solid Machined Lightweight Titanium Body And Clip
- Nichia 219c 5000K High CRI LED
- Triple Emitters
- RGB Secondary LEDs
- Quantum Dragon Driver with Instruction Card
-
Mode Groups: 1- Moonlight, 5%, 15%, 35%, 50%, 100% 2- Moonlight, 5%, 15%, 35%, 100% 3- Moonlight, 15%, 35%, 100% 4- 5%, 15%, 35%, 50%, 100% 5- 5%, 15%, 35%, 100% 6- 5%, 35%, 100% 7- 15%, 35%, 50%, 100% 8- 15%, 50%, 100% 9- 15%, 100% 10- 50% Configuration Options: To enter configuration mode, quickly cycle the switch 10+ times until it starts to flash. Once it starts to flash, you are in configuration mode. Once in configuration mode, the light will give a solid light and ramp down, if you want to modify options 2-3 cycle switch during ramp to move to next option. Option 1 Mode group: when light ramps down it will step down and then the group number will blink followed by another step down. To select the group blinked cycle the switch in the step down cycle after the group you want to use. Option 2 Memory on/off: when light ramps down it will flash low power and then high power. Cycle switch while flashing low if you want memory off and high if you want memory on. Option 3 Strobe: when light ramps down it will flash 3 different power levels, cycle switch while flashing low if you want strobe off, medium for bicycle mode and high for strobe mode. To access these in normal use cycle switch three times rapidly and it will access either strobe programmed when turned on.
-
Out of Stock
- Solid Machined Lightweight Aluminum Body And Clip
- Nichia 219c 5000K High CRI LED
- Triple Emitters
- RGB Secondary LEDs
- Quantum Dragon Driver with Instruction Card
-
Out of StockBulb Type: Nichia 219C High CRI Max Output: 650 lumens Body Material: Titanium OAL: 3.65"" Bezel Diameter: 15.6 mm Body Diameter: 13.0 mm Weight: 1.35 oz. Made in America
-
Mode Groups: 1- Moonlight, 5%, 15%, 35%, 50%, 100% 2- Moonlight, 5%, 15%, 35%, 100% 3- Moonlight, 15%, 35%, 100% 4- 5%, 15%, 35%, 50%, 100% 5- 5%, 15%, 35%, 100% 6- 5%, 35%, 100% 7- 15%, 35%, 50%, 100% 8- 15%, 50%, 100% 9- 15%, 100% 10- 50% Configuration Options: To enter configuration mode, quickly cycle the switch 10+ times until it starts to flash. Once it starts to flash, you are in configuration mode. Once in configuration mode, the light will give a solid light and ramp down, if you want to modify options 2-3 cycle switch during ramp to move to next option. Option 1 Mode group: when light ramps down it will step down and then the group number will blink followed by another step down. To select the group blinked cycle the switch in the step down cycle after the group you want to use. Option 2 Memory on/off: when light ramps down it will flash low power and then high power. Cycle switch while flashing low if you want memory off and high if you want memory on. Option 3 Strobe: when light ramps down it will flash 3 different power levels, cycle switch while flashing low if you want strobe off, medium for bicycle mode and high for strobe mode. To access these in normal use cycle switch three times rapidly and it will access either strobe programmed when turned on.
-
Out of StockBulb Type: Nichia 219C High CRI Max Output: 650 lumens Body Material: Titanium OAL: 3.65"" Bezel Diameter: 15.6 mm Body Diameter: 13.0 mm Weight: 1.35 oz. Made in America
-
Out of Stock
- Solid Machined Lightweight Aluminum Body And Clip
- Nichia 219c 5000K High CRI LED
- Triple Emitters
- RGB Secondary LEDs
- Quantum Dragon Driver with Instruction Card
-
Mode Groups: 1- Moonlight, 5%, 15%, 35%, 50%, 100% 2- Moonlight, 5%, 15%, 35%, 100% 3- Moonlight, 15%, 35%, 100% 4- 5%, 15%, 35%, 50%, 100% 5- 5%, 15%, 35%, 100% 6- 5%, 35%, 100% 7- 15%, 35%, 50%, 100% 8- 15%, 50%, 100% 9- 15%, 100% 10- 50% Configuration Options: To enter configuration mode, quickly cycle the switch 10+ times until it starts to flash. Once it starts to flash, you are in configuration mode. Once in configuration mode, the light will give a solid light and ramp down, if you want to modify options 2-3 cycle switch during ramp to move to next option. Option 1 Mode group: when light ramps down it will step down and then the group number will blink followed by another step down. To select the group blinked cycle the switch in the step down cycle after the group you want to use. Option 2 Memory on/off: when light ramps down it will flash low power and then high power. Cycle switch while flashing low if you want memory off and high if you want memory on. Option 3 Strobe: when light ramps down it will flash 3 different power levels, cycle switch while flashing low if you want strobe off, medium for bicycle mode and high for strobe mode. To access these in normal use cycle switch three times rapidly and it will access either strobe programmed when turned on.